ISY.COM by INTERSYSTEM Ingegneria Informatica   

OFFERTE| ORDINI da Confermare| ORDINI in Evasione | AIUTO
cw cws
  Non ci sono Prodotti nel Carrello    
Zoom Altra immagine ingrandita disponibile
Zoom Zoom Zoom Zoom

PartNumber: PED-DL100EP1

Shuttle XPC Slim DL1000EP Intel Celeron J4005
HDMI, DP, VGA, SSD 32GB M.2, 4GB, Windows 10 Pro (64 bit)

Marchio: Shuttle PartNumber: PED-DL100EP1
80742.01 Codice EAN: 4046047103386
  Aggiungi Prodotto al Carrello Aggiungi 1 pezzo al tuo carrello  
  dispo Disponibile c/o Vendor  Notifica Disponibilità  
No Login .... No Prezzo
   Altri articoli del Produttore:  Shuttle
   Altri articoli nelle Categorie:
     / Hardware / Sistemi / XPC

Fanless 1-litre PC suitable for 24/7 operation
The Shuttle XPC slim DL1000EP is a fanless Slim PC system with an energy-efficient Intel Celeron J4005 "Gemini Lake" processor. The integrated graphics is based on Intel's powerful Intel UHD Graphics 600 (9th gen) that supports hardware acceleration for 4K video encoding/decoding with H.265 and VP9 thanks to the DisplayPort. This PC works virtually noiseless and is therefore perfectly suited for noise-sensitive environments. In addition, it is approved for 24/7 permanent operation


Fanless and silent
Completely fanless, virtualy noiseless
Passive cooling through convective heat transfer
Perfect to be used in noise-sensitive environments
Fanless means less dust and thus virtually no maintenance required
Low Power Consumption
Power consumption in idle mode: 4.6 W
Power consumption under full load: 11.3 W / 17.6 W (CPU / CPU+graphics)
(measured with 4 GB DDR4-2400 SO-DIMMs and 120 GB 2.5" SSD under Windows 10 64-bit)
Slim PC with black chassis made of steel
Dimensions: 190 x 165 x 43 mm (LWH) = 1.35-litre
Weight: 1.3 kg net and 2.1 kg gross
Two holes for Kensington Lock and numerous
threaded holes (M3) at both sides of the chassis
Operation Position
1) Horizontal
2) Vertical with mounted feet.
These feet can be purchased as optional accessory PS02.
3) Vertical (e.g. VESA-mounted behind an appropriate monitor)
In vertical position, the front USB ports should points upward.
Ventilation holes must not be blocked to ensure sufficient cooling.
Operation System
Windows 10 Pro (64-bit)
Intel® Celeron® Processor J4005, Dual Core
CPU clock frequency: 2.0 GHz, max. Turbo frequency: 2.7 GHz
Code name: Gemini Lake, Goldmont Plus microarchitecture
14 nm structure, FCBGA1090 package (soldered)
CPU cores / Threads: 2 / 2
L2 Cache: 4 MB
Thermal Design Power (TDP): 10 W
Supports x86-64, AES-NI, VT-x (EPT), VT-d
System-on-Chip processor (SoC) with integrated graphics processor, no chipset required
Integrated Graphics
The Graphics Processing Unit (GPU) is integrated in the processor
Intel® UHD Graphics 600 (9th Gen), graphics frequency: 250~700 MHz
Supports DirectX 12, OpenGL 4.3, OpenCL 1.2, OpenGL ES 3.0, Intel Quick Sync Video, Intel Clear Video (HD)
Execution Units (EU): 12
Triple Display Support via three video outputs:
- HDMI 1.4b: max. 4096 x 2160 @ 30 Hz or 1920 x 1200 @ 60 Hz
- DisplayPort 1.2: max. 4096 x 2160 @ 60 Hz
- D-Sub/VGA: max. 1920 x 1200 resolution @ 60 Hz
Supports two digital displays and one analog display simultaneously.
The D-Sub/VGA connector does not support the Hot Plug feature.
UEFI Firmware
16 MB Flash ROM with AMI's Aptio UEFI BIOS Firmware
Based on the Unified Extensible Firmware Interface (UEFI) [1]
Supports Power fail resume / AC power on state / always on / always off [3]
Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states
Supports boot up from external flash memory cards
With embedded Firmware TPM v2.0 (fTPM)
4 GB DDR4-2400 SO-DIMM memory module with 260 pins
Maximum total size: 8 GB (either 1x 8 GB or 2x 4 GB)
Supports DDR4-2400 (PC4-19200U) SDRAM at 1.2V
Supports two unbuffered DIMM modules (no ECC)
2.5" Bay for Hard disk drive/SSD
Supports one drive in 6.35 cm / 2.5" format (hard disk or SSD)
Serial ATA III Interface with up to 600 MB/s transfer speed
Max. height 12.5 mm
Pre-installed SATA cable (data / power)
Supports Unified Extensible Firmware Interface (UEFI)
M.2-2260 SSD card
32 GB SSD card
M.2 2260 form factor
Interface: SATA
Integrated Audio
Realtek ALC269 Audio Codec
Two analog audio connectors (3.5 mm):
1) Line out (head-phones)
2) Microphone input
Onboard connector for 2x 2 Watt speakers
Digital multi-channel audio output: via HDMI and DisplayPort
Card Reader
Integrated card reader
supports standard SD, SDHC and SDXC memory flash cards
Supports boot from SD card
Controller: Realtek RTS5170 Media Processor
Wired Network
RJ45 connector supports Gigabit LAN at 10/100/1000 Mbit/s.
Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
Supports Wake-on-LAN
Wireless Network (WLAN)
M.2-2230 WLAN card with Realtek RTL8188EE Controller
Supports IEEE 802.11b/g/n
Max. 150Mbps up-/downstream (1T1R) at 2.4 GHz
One external antenna supplied
LEDs and Buttons
Power button
Power LED (blue)
HDD LED (yellow)
Front Panel Connectors
2x USB 3.0
SD card reader
Audio line-out (headphones)
Microphone input
Back Panel Connectors
HDMI 1.4b digital video and audio output
DisplayPort 1.2 digital video and audio output
D-Sub/ VGA analog video output (15-pin) - no hot plug
4x USB 2.0
Gigabit network (LAN, RJ45)
2x RS232 serial port, 9-pin D-Sub (support of an auxiliary voltage of 5 / /12 V,
the left port is switchable to RS422 / RS485) [6]
DC input for the external power adapter
4-pin connector (2.54 mm pitch) supports
- external power on button
- Clear CMOS function
- +5V DC voltage for external components
External WLAN antenna (perforation for second antenna available)
Other Onboard Connectors
Connector SPK1 (4-pin) supports two 2 W speakers
Connectors COM1/COM2 for serial ports (occupied)
Connector CN9 for supplied CMOS battery (type CR2032)
Jumper JP2 for power-on-after-power-fail (hardware solution) [3]
Power Supply
External 40 W AC/DC power adapter (fanless)
AC Input: 100 ~ 240 V AC, 50 ~ 60 Hz
DC Output: 19 V / 2.1 A
Automatic voltage adjust
Dimensions: 89.5 x 37 x 26.5 mm (LWH)
DC Input connector
DC Connector: 5.5 / 2.5 mm (outer/inner diameter)
The DC-input of the computer supports an external power source
with either 12 V ±5% or 19 V ±5%.
Supplied Accessories
Multi-language user guide (EN, DE, FR, ES, JP, KR, SC, TC)
VESA mount for 75 / 100 mm standard (two metal brackets)
Four thumbscrews M3 x 5 mm (screws together VESA mount and PC)
Four screws M4 x 10 mm (to affix VESA mount on the PC)
Four screws M3 x 4 mm (to mount a 2.5" storage into the bay)
Driver DVD (Windows 64-bit)
External 40 W power adapter with power cord
Optional Accessies:
- PS02: optional stand for vertical operation
- CXP01: adapter cable for external power button
- PRM01: 2U rack-mount front plate for two Shuttle XPC slim PCs
- WWN01: adapter plus 2 antennas & cables supports one M.2 LTE module and one SIM card [2]
24/7 Nonstop Operation
This device is approved for 24/7 permanent operation.
- Free air circulation around the PC must be guaranteed.
- Ventilation holes must be kept clear.
- Any installed disk must also be approved for permanent
operation by its manufacturer
Environmental Specifications
Operating temperature range: 0 ~ 40 °C
Relative humidity range: 10 ~ 90 % (non-condensing)
Certification and Compliance
Safety: CB, BSMI, ETL
Other: RoHS, Energy Star, ErP
This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
(1) 2004/108/EC relating to electromagnetic compatibility (EMC),
(2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage limits (LVD),
(3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP),
(4) 1999/5/EC related to Radio and Telecommunications Terminal Equipment (R&TTE)

[1] UEFI-Firmware (versus BIOS)
Just as with many modern PCs, the Shuttle XPC slim Barebone DL10J does away completely with a BIOS, but uses a pure UEFI firmware instead. The terms UEFI firmware and BIOS are widely used synonymously, but hardware initialising is now performed by the UEFI. Users might not even notice, but the operating system must be installed and executed in UEFI mode. UEFI creates a GUID Partition Table (GPT) on the system partition instead of a Master Boot Record (MBR). A PC running pure UEFI firmware alone must have a 64-bit operating system installed.
[2] Optional LTE support
Shuttle provides the optional "Shuttle Accessory WWN01" which consists of an adapter card, two antennas plus 20 cm antenna cables. The adapter card replaces the standard WLAN card in the M.2-2230 slot and works as a riser card for a 3G/LTE card and a SIM card. The 3G/LTE card must have M.2-3042 Key B format with MHF IV (I-PEX4) connectors for the antenna. In addition, it supports one Nano-SIM card (Mini and Micro format is not supported). The required 3G/LTE card and SIM card are not included in WWN01.
[3] Power-on-after-power-fail
The BIOS setup provides a "Power-on-after-power-fail" function that can be found under "Power Management Configuration". As the name indicates, this function determines the PC's behaviour after power failure: (1) unconditional power on, (2) restore former status or (3) keep system turned off. As a matter of the nature of this function, it may fail after short power failures. This is why the Shuttle XPC slim Barebone DL10J also comes with a hardware-based solution. By removing Jumper JP1 (on the mainboard behind the D-Sub/VGA port) the system will start unconditionally once power is supplied.
[4] HDMI output supports DVI-D with optional adapter
[5] How to convert DisplayPort into HDMI/DVI
The DisplayPort output can be converted to HDMI or DVI by an additional, passive adapter cable. For example:
DELOCK 82590: 1 m, DisplayPort (male, 20p) to HDMI-A (male, 19p)
DELOCK 82435: 5 m, DisplayPort (male, 20p) to DVI-D (male, 24p)
The integrated graphics automatically detects the connected display and puts out the appropriate electric signal - either through DisplayPort (without an adapter) or HDMI/DVI (with an adapter).
However, a monitor with a DisplayPort connector cannot be connected to the HDMI port with a simple, passive adapter.
[6] Serial Ports
This PC features two serial RS232 ports with 9-pin D-Sub connectors on the back panel. The left COM port (COM1) can also be configured as RS422 and RS485 in the BIOS setup.
Pin 9 of the D-Sub COM-Port is a multi-functional signal. Based on the Jumper JP2 configuration on the mainboard, it can be configured as Ring Indicator (RI) or external power supply with a voltage level of either 5 V or 12 V. Each COM port can be configured separately. The maximum current is 500 mA per connector.

  Peso Lordo: 1 Kg
Dimensioni Lorde: 100x100x100 mm
 Shuttle - Sito web:  

Tutti i prezzi NON sono comprensivi di IVA. Il Listino è in EURO, salvo se diversamente indicato. Marchi e i nomi di prodotti sono registrati dai rispettivi titolari. Dati a cura del Fornitore. Non possiamo essere ritenuti responsabili per eventuali errori o refusi presenti. Prodotti, versioni, prezzi, termini e garanzie sono soggetti a cambiamenti senza preavviso. In ogni rapporto di fornitura valgono le Condizioni Generali di Vendita. Prezzi aggiornati in tempo reale.
Perchè Comprare qui?
punto Prodotti di qualità dei maggiori Marchi
 Informazione sulla disponibilità dei prodotti
 Aiuto all'acquisto
 Servizi EDI e di trasferimento Dati Elettronici
 Pagamenti sicuri con transazioni riservate
 Rispetto della Privacy
 Trasparenza sui costi di trasporto
 Supporto nella soluzione di problemi
 Professionalità e competenza dello Staff
 Ricerca su richiesta di prodotti non a Listino

Sistemi Isy
3DRevolution 2017 doc
Tutti i Prodotti JABRA
Tutti i Prodotti Kingston
Tutti i Prodotti Kontron
Tutti i Prodotti LaCie
Chi siamo | Site Map | Privacy  | Contattaci | ISO 9001:2000 |© 2007 INTERSYSTEM Ingegneria Informatica S.r.l. Società a socio unico P.IVA 00865531008 CF 01203550353
E' vietata la riproduzione anche parziale. Le informazioni riportate su sono soggette a modifiche senza preavviso.